Skip to main content

Shipping / Receiving

Written by Command on . Posted in Careers.

CAREERS

Shipping / Receiving

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Gansevoort, NY

    Location

  • Full Time

    Working Time

  • Direct Entry

    Level

Overview

The Shipping/Receiving position is responsible for the efficient handling of incoming and outgoing hardware and supplies. This role involves inspecting, documenting, and organizing shipments, as well as distributing inventory and ensuring the quality and quantity of incoming products. The Shipping/Receiving personnel must be able to operate a forklift safely and should have basic computer skills for documentation purposes.

Duties & Responsibilities

  • Receive and document incoming hardware and supplies.

  • Inspect incoming products for quality and quantity.

  • Promptly unload trucks and deliveries.

  • Organize and schedule shipments.

  • Organize and distribute inventory.

  • Handle non-conforming incoming hardware.

Requirements & Skill Set

  • Ability to use a computer along with Word, Excel and Outlook.

  • Ability to read and analyze information, fill out forms and documents.

  • Ability to move, traverse and be on your feet all day.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

  • Ability to safely operate a forklift.

Education

  • Two-year degree.

  • High school diploma.

  • Trade school.

  • GED to be evaluated.

Expectations

  • Be punctual and work overtime as needed.

  • Maintain and keep areas clean and neat.

  • Communicate and interface with various department personnel.

  • Work independently or with a team.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above lists of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading

Project Manager / Electrical Engineer

Written by Command on . Posted in Careers.

CAREERS

Project Manager / Electrical Engineer

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Gansevoort, NY

    Location

  • Full Time

    Working Time

  • Direct Entry

    Level

Overview

The Project Manager / Electrical Engineer role combines project management and electrical engineering expertise. This position involves overseeing projects from concept to commissioning, estimating and quoting, programming and designing industrial control systems (PLC’s, HMI’s, Drives, Motion systems), travel for on-site commissioning, CAD design for schematics and panel layouts, and handling high-level service calls on-site. Effective communication, strong organizational and leadership skills, and a keen understanding of customer requirements are essential.

Duties & Responsibilities

  • Project management from concept to commissioning.

  • Project estimating and quoting.

  • Programming and design of PLC’s, HMI’s, Drives and Motion systems.

  • Travel and on-site commissioning.

  • CAD schematic and panel layout designs.

  • On-site high-level service calls.

Requirements & Skill Set

  • Experience with industrial controls design and programming.

  • CAD design experience.

  • Outstanding communication skills.

  • Excellent organizational and leadership skills.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

Education

  • Four-year degree.

  • Two-year degree.

  • High School diploma and experience.

Expectations

  • Be punctual and work overtime as needed.

  • Adjust to challenging non-repetitive design projects.

  • Willing to work on multiple projects or applications.

  • Understanding of customer requirements to provide acceptable solutions.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above lists of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading

Field Service Technician

Written by Command on . Posted in Careers.

CAREERS

Field Service Technician

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Gansevoort, NY

    Location

  • Full Time

    Working Time

  • Direct Entry

    Level

Overview

The Field Service Technician is a critical role responsible for the maintenance, troubleshooting, and repair of industrial controls and machinery. This position involves responding to on-site service calls, performing PLC logic troubleshooting and updates, installing controls, programming variable speed drives, estimating service costs, and providing quotes. The technician will interact with customers, offering potential upgrades, enhancements, or replacements, and will be expected to engage in control panel fabrication when not traveling.

Duties & Responsibilities

  • Industrial controls and industrial machinery service, troubleshooting and repair.

  • PLC logic troubleshooting and updating.

  • On-site service calls.

  • Controls installations.

  • Variable speed drive programming, startup and troubleshooting.

  • Service cost estimating and quoting.

Requirements & Skill Set

  • Ability to respond to service calls for industrial controls with little notice.

  • Troubleshooting skills using software, meters and various test equipment.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

  • Knowledge of controls such as  PLC’s, DC drives, AC VFD’s, Servos and HMI’s.

  • PLC programming knowledge for connecting, troubleshooting and changes.

Education

  • Two-year degree.

  • High school diploma.

  • Trade school.

  • GED to be evaluated.

Expectations

  • Control panel fabrication when not traveling.

  • Ability to travel on-site for extended times.

  • Interfacing with customers to offer possible upgrades, enhancements or replacements.

  • Be punctual and work overtime as needed.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above lists of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading

Field Service Foreman

Written by Command on . Posted in Careers.

CAREERS

Field Service Foreman

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Gansevoort, NY

    Location

  • Full Time

    Working Time

  • Direct Entry

    Level

Overview

The Field Service Foreman plays a vital role in the maintenance and repair of industrial controls and machinery, with a primary focus on providing on-site service, troubleshooting, and repairs. This role requires expertise in PLC logic troubleshooting and updating, along with the ability to handle service calls with short notice. The foreman is expected to conduct control panel installations, program variable speed drives, estimate service costs, and provide quotes. Strong communication skills are essential, as the foreman will interface with customers to suggest upgrades, enhancements, or replacements.

Duties & Responsibilities

  • Industrial controls and industrial machinery service, troubleshooting and repair.

  • PLC logic troubleshooting and updating.

  • On-site service calls.

  • Controls installations.

  • Variable speed drive programming, startup and troubleshooting.

  • Service cost estimating and quoting.

Requirements & Skill Set

  • Ability to respond to service calls for industrial controls with little notice.

  • Troubleshooting skills using software, meters and various test equipment.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

  • Knowledge of controls such as PLC’s, DC drives, AC VFD’s, Servos and HMI’s.

  • PLC programming knowledge for connecting, troubleshooting and changes.

Education

  • Two-year degree.

  • High school diploma.

  • Trade school.

  • GED to be evaluated.

Expectations

  • Control panel fabrication when not traveling.

  • Ability to travel on-site for extended times.

  • Interfacing with customers to offer possible upgrades, enhancements or replacements.

  • Be punctual and work overtime as needed.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above lists of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading

Field Installation Technician

Written by Command on . Posted in Careers.

CAREERS

Field Installation Technician

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Ganesvoort, NY

    Location

  • Full Time

    Working Time

  • Direct Entry

    Level

Overview

The Field Installation Technician role shares similarities with the Field Installation Foreman position, involving the installation of industrial controls, machinery, and electrical systems. This technician will engage in tasks such as conduit bending, threading, wire pulling, cable sizing, documenting removals, cost estimating, and quoting. Additionally, the technician will collaborate with customers to suggest upgrades, enhancements, or replacements. Control panel fabrication is expected during non-travel periods.

Duties & Responsibilities

  • Industrial controls and industrial machinery installation.

  • Conduit bending, threading and installation.

  • Wire pulling.

  • Wire, cable sizing for amperage requirements and voltage drop calculation.

  • Documenting and removal of old controls and equipment.

  • Cost estimating and quoting.

Requirements & Skill Set

  • Ability to read schematics.

  • Knowledge of controls such as PLC’s, DC drives, AC VFD’s, Servos and HMI’s.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

  • Electrical and mechanical aptitude with troubleshooting skills.

  • Use of hand tools, meters and test equipment.

Education

  • Two-year degree.

  • High school diploma.

  • Trade school.

  • GED to be evaluated.

Expectations

  • Control panel fabrication when not traveling.

  • Ability to travel on-site for extended times.

  • Interfacing with customers to offer possible upgrades, enhancements or replacements.

  • Be punctual and work overtime as needed.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above lists of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading

Custodian, Janitorial, Porter, Maintenance Person

Written by Command on . Posted in Careers.

CAREERS

Custodian, Janitorial, Porter, Maintenance Person

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Ganesvoort, NY

    Location

  • Full Time

    Working Time

  • Direct Entry

    Level

Overview

The primary responsibilities of this position involve daily cleaning and maintenance of facilities, including sweeping, vacuuming, mopping, window cleaning, and various upkeep tasks. The custodian will also need to maintain supplies inventory, assist with setting up and cleaning for special events, and perform other duties as directed, which may include minor repairs.

Duties & Responsibilities

  • Daily cleaning of facilities.

  • Sweeping, vacuuming, mopping, and shoveling.

  • Window cleaning.

  • Maintain supplies inventory.

  • Provide set up and cleaning for special events.

  • Other duties, upkeep, repairs as directed.

Requirements & Skill Set

  • Ability to move, traverse and be on your feet all day.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

  • Willingness to clean.

  • Good organizational skills.

  • Ability to properly and safely use cleaning solvents and chemicals.

Education

  • Two-year degree.

  • High school diploma.

  • Trade school.

  • GED to be evaluated.

Expectations

  • Be punctual and work overtime as needed.

  • Self-motivated and able to make on-the-spot decisions.

  • Recognize and clean areas outside of daily housekeeping needs.

  • Ability to communicate and interface with various department personnel.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above list of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading

Panel Builder

Written by Command on . Posted in Careers.

CAREERS

Panel Builder

Join our dynamic team at RASP Inc. and contribute to the creation of cutting-edge industrial controls and automation solutions.

Apply Now

  • Ganesvoort, NY

    Location

  • Full Time | 1st

    Working Time

  • Entry or Skilled

    Level

Overview

As a Panel Builder at RASP Controls, you will play a critical role in the manufacturing and assembly of electrical control panels for industrial controls and automation systems. Your expertise in panel building and attention to detail will contribute to the successful implementation of our cutting-edge solutions that power various industries. Apply your skills, expertise, and passion for precision in a challenging and rewarding environment.

Duties & Responsibilities

  • Industrial control panel wiring.

  • Mechanical assembly.

  • Layout, drilling & taping controls panels.

  • Fill out documentation and paperwork.

  • Testing and use of meters.

  • Sweeping and cleaning personal space.

Requirements & Skill Set

ENTRY LEVEL

  • Electrical and/or mechanical aptitude.

  • Ability to move, traverse and be on your feet all day.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

  • Ability to work individually and with a team.

SKILLED LEVEL

  • PLC and industrial control wiring experience.

  • Mechanical assembly.

  • Use of hand tools.

  • Electrical and/or mechanical aptitude.

  • Ability to move, traverse and be on your feet all day.

  • Ability to lift and move objects up to 30 lbs. up to a height of 3 feet.

Education

  • Two-year degree.

  • High school diploma.

  • Trade school.

  • GED to be evaluated.

Expectations

  • Keep the work area clean.

  • Follow company rules, policies and ISO procedures.

  • Be punctual and work overtime as needed.

  • Work as part of a team.

Additional Information

The above lists minimum duties, requirements and expectations. These are not necessarily the only duties, requirements and expectations required. The above list of duties, requirements and expectations may differ for each person based on experience, education, training and abilities. This job description is subject to change at any time.

Marisa Balletto

HR

Apply Now

Continue reading